Preparation Questions

By 10pm the evening before lecture, submit your answer to 1) each lecture's question and 2) own questions via the submission web site as a file named "lec[n].txt" (e.g,, "lec2.txt" for the second lecture).

intro

(optional) Watch Peter Denning’s talk, “Perspectives on OS Foundations”, presented at the SOSP History Day Workshop (SOSP‘15).

tools

Read the Tools page, install the software, and submit the below the output of below commands?

$ git --version
$ qemu --version
$ uname -a
$ lsb_release -a

If you have more time, watch Linus’s talk on git and give us any questions if you have. We will address your questions during the tutorial.

boot

Let’s first understand your hardware, starting from the CPU information. What’s your CPU and could you interpret each fields of your output?

$ cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 61
model name      : Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz
stepping        : 4
microcode       : 0x21
cpu MHz         : 2832.273
cache size      : 4096 KB
physical id     : 0
siblings        : 4
core id         : 0
cpu cores       : 2
apicid          : 0
initial apicid  : 0
fpu             : yes
fpu_exception   : yes
cpuid level     : 20
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
  pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht
  tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon
  pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu
  pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg
  fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt
  tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm
  3dnowprefetch ida arat epb pln pts dtherm intel_pt tpr_shadow
  vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2
  smep bmi2 erms invpcid rtm rdseed adx smap xsaveopt
bugs            :
bogomips        : 5189.72
clflush size    : 64
cache_alignment : 64
address sizes   : 39 bits physical, 48 bits virtual
...

Read Appendix A/B and answer four questions below (concisely as possible):

  1. Due to sector granularity, the call to readseg in the text is equivalent to readseg((uchar*)0x100000, 0xb500, 0x1000). In practice, this sloppy behavior turns out not to be a problem Why doesn’t the sloppy readsect cause problems?
  2. Any security problems since BIOS BIOS lasts longer than the OS?
  3. Suppose you wanted bootmain() to load the kernel at 0x200000 instead of 0x100000, and you did so by modifying bootmain() to add 0x100000 to the va of each ELF section. Something would go wrong. What?
  4. It seems potentially dangerous for the boot loader to copy the ELF header to memory at the arbitrary location 0x10000. Why doesn’t it call malloc to obtain the memory it needs?

unix

What kind of UNIX’s features do you see on today’s operating systems? and what’s not? Do you see any missing features that are prevalent in modern, commodity operating systems?

basic

Read Bitwise operators, Pointers and Pointers to structures and answer the questions below:

#1 what will be output if you will execute following c code?

  int array[] = {0,1,2,3};
  int* x = array + 1;
  int a = ++*x;
  int b = a + *x;
  printf("%d\n", b);
  return 0;

1) 0
2) 1
3) 2
4) 3
5) 4
> ANSWER :

#2 what will be output if you will execute following c code?

  #define WHATISTHIS(a,b,c) ((a >> (b + 1 - c)) & ~(~0 << c))
  #define PRNT(a) \
          printf("value = 0x%08x\n",a);


  int main()
  {
          unsigned x = 3210;
          int p = 10;
          int n = 4;
          PRNT(WHATISTHIS(x,p,n));

          return 0;
  }

1) value = 0x00000009
2) value = 0x00030120
3) value = 0x00000010
4) value = 0x00000004
5) Compilation error
> ANSWER :

#3 what will be output if you will execute following c code?

  int array[4] = {1,2,3,4};
  if(array[0] - array[1] < sizeof(array)) printf("%d",array[sizeof(char)]);
  else printf("%d", array[sizeof(short)]);

1) 1
2) 2
3) 3
4) 4
5) Compilation error
> ANSWER :

#4 Save the source code below as test.c

  int main()
  {
    const char* str1 = "hello";
    static char* str2 = "cs3210";
    printf("%s %s", str1, str2);
  }

  # Follows the commands below, submit your ouput
  $gcc -o test test.c
  $readelf -S ./test
  $objdump -s -j .rodata ./test
  $objdump -s -j .text ./test
  $objdump -s -j .data ./test

If you have more time, Please watch the youtube video. If you have a question, Please write down with you answer. You just need to write your answer the right next to “>ANSWER:”, attach your output and save your file as tut2.txt and submit the file in our submission site.

memory

Please, read the set of article before the tutorial:

Caches:

  1. Cache basics
  2. What every programmer should know about memory (optoinal)

Linux process filesystem:

  1. Man-page of proc pseudo file system or man 5 proc

Concisely answer the following based on the readings:

  1. Can you extract the working set size of a program in Linux from the userspace?
  2. What is the L1, L2 and LLC size of your system?
  3. Consider you are working on x86 system. What will be the size of this structure and why?
struct f {
    char *p;
    char c;
};

isolation

This is a program that dumps a memory region that you specify. We are going to see two types of memory isolation by using this toy program.

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <err.h>
#include <ctype.h>

int main(int argc, char *argv[])
{
  if (argc != 2)
    errx(1, "[usage] %s [mem-addr]", argv[0]);

  unsigned char *addr = (char *)strtol(argv[1], NULL, 16);
  for (int i = 0; i < 4; i ++) {
    printf("%016x: ", (unsigned long)addr);
    for (int j = 0; j < 0x10; j ++)
      printf("%02x ", *(addr + i*0x10 + j));
    printf("| ");
    for (int j = 0; j < 0x10; j ++) {
      char c = *(addr + i*0x10 + j);
      printf("%c", isprint(c) ? c : '.');
    }
    printf("\n");
  }
  return 0;
}

To compile, try gcc -o memdump memdump.c after saving the above snippet as memdump.c. To run, ./memdump [ADDR], and “[ADDR]” should be the address that you want to read (e.g., “0x0000” to read the virtual address 0.

  1. Explain the above program.
  2. Try,
$ ./memdump 0x0
zsh: segmentation fault  ./memdump 0x0

$ dmesg | tail -1
[50612] memdump[136]: segfault at 0 ip 000000000804855e sp 00000000ffa032f0 error 4 in mem-dump[8048000+1000]

What happen? Could you explain/interpret the line?

  1. Let’s try to access a memory region in kernel. Pick any reasonable virtual address depending on your architecture (32-bit or 64-bit).
$ ./memdump 0xfffffffffffff00
zsh: segmentation fault  ./memdump 0xfffffffffffff00

$ dmesg | tail -1
[50809] traps: memdump[139] general protection ip:4006dd sp:7fff412ae540 error:0 in a.out[400000+1000]

What happen? Could you explain/interpret the line?

  1. Also, could you find a memory region that you can safely access through memdump?
  2. (Exercises 2 in the xv6 book) KERNBASE limits the amount of memory a single process can use, which might be irritating on a machine with a full 4 GB of RAM. Would raising KERNBASE allow a process to use more memory?

bootloader

Please, read the set of pages before the tutorial:

  1. Linux Inside: Kernel booting process
  2. Master Boot Record
  3. GNU GRUB Manual 2.00 (optoinal)

Concisely answer the following questions based on reading above:

  1. When attempting to boot from a hard drive, what does the BIOS try to find? (hint: a boot sector) where is the boot sector stored in?
  2. There are a number of bootloaders that can boot Linux, such as GRUB 2 and syslinux. Is there anything else? Specify two more.
  3. What is the difference vmlinuz and vmlinux? why do we need kernel compression and decompression?
  4. Follows the commands below, submit your output
$ lsblk
$ grub-install -V

pagetable

  1. Explain how ‘test.c’ and ‘readvirt.c’ work.
// gcc -o test test.c
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>

int main(int argc, char *argv[])
{
  char buf[1024];
  for (int i = 0; i < sizeof(buf); i ++)
    buf[i] = i;

  printf("/proc/%d/pagemap, buf=%p\n", getpid(), buf);
  getchar();

  return 0;
}
// gcc -o readvirt readvirt.c

#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <sys/mman.h>
#include <unistd.h>
#include <err.h>
#include <ctype.h>
#include <stdint.h>
#include <inttypes.h>

int main(int argc, char *argv[])
{
  if (argc != 3)
    err(1, "[usage] %s [/proc/self/pagemap] [vaddr]", argv[0]);

  off_t vaddr = strtoul(argv[2], NULL, 16);
  size_t PAGE_SIZE = sysconf(_SC_PAGE_SIZE);

  int fd = open(argv[1], O_RDONLY);
  if (fd == -1)
    err(1, "failed to open pagemap");

  // Q?
  uint64_t off = ((uint64_t)vaddr / PAGE_SIZE) * sizeof(uint64_t);
  if (lseek(fd, off, SEEK_SET) != off)
    err(1, "failed to lseek");

  uint64_t pfn;
  if (read(fd, &pfn, sizeof(pfn)) != sizeof(pfn))
    err(1, "failed to read pfn");

  // Q?
  printf("0x%" PRIx64 ", pfn=%" PRIu64 "\n",
         pfn, pfn & 0x7FFFFFFFFFFFFF);

  close(fd);

  return EXIT_SUCCESS;
}

By using ‘readvirt’, we are going to find out the physical page of the ‘buf’ in the ‘test’ program. In doing so, you need two important things, 1) /proc/kcore (an core interface to the live kernel), and 2) the base virtual address of direct mapping (KERNBASE in xv6). In Linux (64-bit), 0xFFFF880000000000 is your KERNBASE.

$ ./test
/proc/24823/pagemap, buf=0x7ffd224c4e90

$ sudo ./readvirt /proc/24823/pagemap 0x7ffd224c4e90
0x860000000000ace9, pfn=44265

$ gdb -c /proc/kcore
(gdb) x/30x 0xFFFF880000000000 + 44265 * 4096 + 3728
0xffff88000ace9e90:     0x00    0x01    0x02    0x03    0x04    0x05    0x06    0x07
0xffff88000ace9e98:     0x08    0x09    0x0a    0x0b    0x0c    0x0d    0x0e    0x0f
0xffff88000ace9ea0:     0x10    0x11    0x12    0x13    0x14    0x15    0x16    0x17
0xffff88000ace9ea8:     0x18    0x19    0x1a    0x1b    0x1c    0x1d
  1. Please locate the physical page of ‘buf’ of ‘test’ (similar to above), and explain to us how you locate the buf.
  2. Please locate the physical page for the ‘main’ function of ‘test’, and disassemble the code region to validate the content of the physical page.

weird

Please go through the following links:

  1. Exploitation and state machines
  2. Exploit Programming (till page 4 before “Exploitation and the Fundamental Questions in Computing” section)

Concisely answer the following question based on the readings and another question on page table traversal:

  1. What do you really understand by “weird machines”? (2-3 sentence)
  2. Describe at least two examples of “weird machines”. (2-3 sentences for each)
  3. How can you traverse the table directory/entry in JOS? Write a code snippet to perform the page directory and page table traversal.

vmapps

  1. If xv6 had not used super pages, what would be the right declaration for entrypgdir?
  2. Say your were an instructor, and want to evaluate the understanding of your students on xv6 (Chap 0-2). Please come up with two good questions for quiz1 and provide to us. We plan to include a few questions made by students for quiz1.

lazyalloc

Please, read the links below.

  1. C dynamic memory allocation
  2. Man-page of sbrk or man 2 sbrk
  3. Virtual Memory management

Concisely answer the following based on the readings:

  1. What is lazy memory allocation?
  2. What is difference between lazy allocation policy and eager reservation policy?
  3. When page fault happens, how does Kernel allocate physical memory?

pre-proposal

Please take a look on the final project page.

Please submit one page summary of your idea along with your background. You might want to follow this structure:

  1. Background
  2. Final Project Idea

div

#include "types.h"
#include "user.h"

int
main(int argc, char **argv)
{
  int x, y, z;

  if (argc < 3){
    printf(2, "usage: div x y\n");
    exit();
  }
  x = atoi(argv[1]);
  y = atoi(argv[2]);
  z  = x / y;
  printf(1, "%d / %d = %d\n", x, y, z);
  exit();
}

Save the above code as div.c and modify Makefile to include the div program to the xv6 fs image. Please do each step and explain in detail.

  1. open div.asm and find the idivl instruction (e.g., at 0x62)
  2. set a breakpoint at idivl (e.g., b *0x62)
  3. run div 1 0 in xv6 shell
  4. info registers, what’s cs & esp?
  5. single step: si
  6. check registers again: in kernel now!
  7. x/6x $esp?
  8. run to trap(): who set tf1->trapno?

locking

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <err.h>
#include <pthread.h>

int count = 0;

void* run(void *arg)
{
  register int cnt = *(int *)arg;
  for (register int i = 0; i < cnt; i++) {
    asm volatile("incl %0"
                 : "+m"(count)
                 : "m"(count)
                 : "memory");
  }
  return NULL;
}

int main(int argc, char *argv[])
{
  int ncpu = atoi(argv[1]);
  int upto = atoi(argv[2]);

  pthread_t *tids = malloc(ncpu * sizeof(pthread_t));

  for (int i = 0; i < ncpu ; i ++) {
    if (pthread_create(&tids[i], NULL, run, &upto))
      err(1, "failed to creat a thread");
  }
  for (int i = 0; i < ncpu ; i ++)
    pthread_join(tids[i], NULL);

  printf("cpu = %d, count = %d\n", ncpu, count);

  return 0;
}

Save the above code to ‘count.c’ and compile like below:

$ gcc -o count count.c -lpthread
  1. Explain the code, and run the program like below:
$ ./count 1 1000
cpu = 1, count = 1000

$ ./count 2 1000
cpu = 2, count = 2000
  1. Interestingly, the total number of count is often not quite correct. Please explain why that is happening?
$ ./count 2 1000
cpu = 2, count = 1029
  1. How to fix this problem?
$ ./count 4 100000
cpu = 4, count = 400000

threads

Please, read the first part of chapter 5 to understand what happens when a kernel switches task from one process to other. Also look into the following fork() method in proc.c file in xv6.

int fork(void)
{
  int i, pid;
  struct proc *np;

  // Allocate process.
  if((np = allocproc()) == 0)
    return -1;

  if((np->pgdir = copyuvm(proc->pgdir, proc->sz)) == 0){
    kfree(np->kstack);
    np->kstack = 0;
    np->state = UNUSED;
    return -1;
  }

  np->sz = proc->sz;
  np->parent = proc;
  *np->tf = *proc->tf;

  // Clear %eax so that fork returns 0 in the child.
  np->tf->eax = 0;

  for(i = 0; i < NOFILE; i++)
  if(proc->ofile[i])
    np->ofile[i] = filedup(proc->ofile[i]);

  np->cwd = idup(proc->cwd);
  safestrcpy(np->name, proc->name, sizeof(proc->name));
  pid = np->pid;

  acquire(&ptable.lock);
  np->state = RUNNABLE;
  release(&ptable.lock);
  return pid;
}

Concisely answer the following based on the readings, and code:

  1. What happens when kernel switches stack from one process to other?
  2. Why is copyuvm() called? Also, will this be required when parent and child process share address space?
  3. How is the acquire and release method implemented in xv6?

sched

#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <err.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <sys/time.h>

double now()
{
  struct timeval tv;
  gettimeofday(&tv, 0);
  return tv.tv_sec + tv.tv_usec / 1000000.0;
}

int count = 0;

void* run(int cnt)
{
  double beg = now();
  for (register int i = 0; i < cnt; i++) {
    asm volatile("incl %0"
                 : "+m"(count)
                 : "m"(count)
                 : "memory");
  }
  double end = now();

  printf("%d: %.2f sec\n", getpid(), end - beg);

  return NULL;
}

int main(int argc, char *argv[])
{
  if (argc < 4) {
    printf("[usage] %s [#proc] [count] [cmd]\n", argv[0]);
    exit(1);
  }

  if (getuid() != 0) {
    printf("need to run as a root\n");
    exit(2);
  }

  int ncpu = atoi(argv[1]);
  int upto = atoi(argv[2]);

  // invoke n processes
  int *child = malloc(sizeof(int) * ncpu);
  for (int i = 0; i < ncpu; i ++) {
    if ((child[i] = fork()) == 0) {
      printf("%d: runs\n", getpid());
      run(upto);
      exit(0);
    }
  }

  // run a command over child pids
  for (int i = 3; i < argc; i ++) {
    char cmd[256];
    snprintf(cmd, sizeof(cmd), "%s %d", argv[i], child[i-3]);
    printf("execute: %s\n", cmd);
    system(cmd);
  }

  int status;
  for (int i = 0; i < ncpu; i ++)
    wait(&status);

  return 0;
}
  1. Build the benchmark program by running gcc -o count count.c. Explain how this benchmark works.
  2. In Linux, users can change the scheduling policy of processes through a chrt (or man chrt) command. Explain their four scheduling policies.
  3. Run the command below and explain its result. (-f: SCHED_FIFO)
$ sudo ./count 10 10000000000 "chrt -f -p 99"
  1. How to sort all processes according to their pid (i.e., as their execution time)? What are the proper commands at ”???”
$ sudo ./count 5 1000000000 "???" ...
30433: runs
30434: runs
30435: runs
execute: ...
30436: runs
30437: runs
execute: ...
execute: ...
execute: ...
execute: ...
30433: 2.55 sec
30434: 2.56 sec
30435: 2.57 sec
30436: 2.59 sec
30437: 4.44 sec

coordination

Read “5. Scheduling” and answer the following question.

Sleep has to check lk != &ptable.lock to avoid a deadlock. It could eliminate the special case by replacing (2817-2820)

if(lk != &ptable.lock){
    acquire(&ptable.lock);
    release(lk);
}

with

release(lk);
acquire(&ptable.lock);

Doing this would break sleep(). How?

concurrent-kv

  1. make it better ..

Read the provided kv.c code. This is the baseline code that you will modify in your tutorial 8 to make it scalable while ensuring locking. You do not need to submit any answers for this tutorial prep.

fsck

We are going to add a new file entry to the fs.img by handcrafting the image file (i.e., by using a hex editor such as hexedit, GHex, or wxhexeditor). dumpfs.c is a tool that helps you parse fs.img. Please download dumpfs.c and compile as below.

$ cd xv6
$ make qemu

$ gcc -Werror -Wall -std=gnu11 -o dumpfs dumpfs.c
$ ./dumpfs
> sizeof(superblock) = 8
size = 000003e8 (Size of file system image (blocks))
nblocks = 000003ad (Number of data blocks)
ninodes = 000000c8 (Number of inodes)
nlog = 0000001e (Number of log blocks)
logstart = 00000002 (Block number of first log block)
inodestart = 00000020 (Block number of first inode block)
bmapstart = 0000003a (Block number of first free map block)
> inode = 1 (offset = 0x4040)
  type = T_DIR    (File type)
  nlink = 00000001 (Number of links to inode in file system)
  size = 00000200 (Size of file (bytes))
[00] = 0000003b    ->  ................ ................ ..README
  01 -> .
  01 -> ..
  02 -> README
  03 -> cat
  04 -> echo
  05 -> forktest
  06 -> grep
  07 -> init
  08 -> kill
  09 -> ln
  10 -> ls
  11 -> mkdir
  12 -> rm
  13 -> sh
  14 -> stressfs
  15 -> usertests
  16 -> wc
  17 -> zombie
  18 -> console

How could you add a new dirent { inum = 19, name = “hello” } at the end of the first inode (ino = 1)? Try to boot (make qemu) and run ls on xv6 with the modified fs.img. HINT. Where is the actual block that contains the dirents?

mkfs

In xv6, mkfs.c’ is a standalone program for creating the file system `fs.img. Please read carefully through the code to see how it works. Answer the following questions.

  1. How large can each file be in xv6 and why is this limitation?
  2. How can you increase the maximum size of a file? Discuss the steps.
  3. Next, look at the wsect() and rsect() functions in xv6. For every block that should be written or read it does a lseek() to the actual block location. Can you modify the wsect() and rsect() to support simple memory copy operation to read or write a block?

HINT: First, when you open the file, mmap() the file to a global pointer. Then use the global pointer inside wsect() and rsect() as shown in code snippet below. Also, when you mmap the file, make sure to seek and write a dummy byte to the last location.

void
wsect(uint sec, void *buf)
{
  uint offset = sec * BSIZE;

  //copy to the global mmap pointer here
}

void
rsect(uint sec, void *buf)
{
  uint offset = sec * BSIZE;

  //copy from the global mmap pointer here
}

If you did it correct, you can use the image file to boot xv6 and list the files you included when creating the image.

$ gcc -g mkfs.c -o mkfs
$ ./mkfs fs.img _init _ln _ls _mkdir  _sh  _stressfs _usertests  _zombie ...
$ make qemu
$ ls

log

We are going to dump the log entries in fs.img by using dumplog, which simply dump stashing blocks recorded in the log region. Please download dumplog.c and compile it like below.

$ cd xv6
; please run at least once so that xv6 creates a console file
$ make qemu
; kill xv6

$ gcc -Werror -Wall -std=gnu11 -o dumplog dumplog.c
$ ./dumplog fs.img
> sizeof(superblock) = 8
      size = 000003e8 (Size of file system image (blocks))
   nblocks = 000003ad (Number of data blocks)
   ninodes = 000000c8 (Number of inodes)
      nlog = 0000001e (Number of log blocks)
  logstart = 00000002 (Block number of first log block)
inodestart = 00000020 (Block number of first inode block)
 bmapstart = 0000003a (Block number of first free map block)
> loghead (n=0)
>  block[00] = 034:  .........5...... ................ ................ ................
>  block[01] = 059:  ................ ................ ..README........ ..cat...........
>  block[02] = 000:  ................ ................ ................ ................
>  block[03] = 000:  ................ ................ ................ ................
>  block[04] = 000:  ................ ................ ................ ................
>  block[05] = 000:  ................ ................ ................ ................
>  block[06] = 000:  ................ ................ ................ ................
>  block[07] = 000:  ................ ................ ................ ................
>  block[08] = 000:  ................ ................ ................ ................
>  block[09] = 000:  ................ ................ ................ ................
>  block[10] = 000:  ................ ................ ................ ................
>  block[11] = 000:  ................ ................ ................ ................
>  block[12] = 000:  ................ ................ ................ ................
>  block[13] = 000:  ................ ................ ................ ................
>  block[14] = 000:  ................ ................ ................ ................
>  block[15] = 000:  ................ ................ ................ ................
>  block[16] = 000:  ................ ................ ................ ................
>  block[17] = 000:  ................ ................ ................ ................
>  block[18] = 000:  ................ ................ ................ ................
>  block[19] = 000:  ................ ................ ................ ................
>  block[20] = 000:  ................ ................ ................ ................
>  block[21] = 000:  ................ ................ ................ ................
>  block[22] = 000:  ................ ................ ................ ................
>  block[23] = 000:  ................ ................ ................ ................
>  block[24] = 000:  ................ ................ ................ ................
>  block[25] = 000:  ................ ................ ................ ................
>  block[26] = 000:  ................ ................ ................ ................
>  block[27] = 000:  ................ ................ ................ ................
>  block[28] = 000:  ................ ................ ................ ................
>  block[29] = 000:  ................ ................ ................ ................

To emulate unsuccessful commits, we are going to inject two errors to the commit() function (see, two panics in below).

// xv6/log.c
static void
commit()
{
  if (log.lh.n > 0) {
    write_log();     // Write modified blocks from cache to log
    // Q1: panic("after writing to log!");
    write_head();    // Write header to disk -- the real commit
    // Q2: panic("after writing the loghead!");
    install_trans(); // Now install writes to home locations
    log.lh.n = 0;
    write_head();    // Erase the transaction from the log
  }
}

Your task is to uncomment each panic, trigger the injected bug, and interpret its result (e.g., fs.img) with dumplog.

Specifically, after uncommenting each panic, please run:

$ make qemu
; on xv6, trigger commit()
$ cat README > x
; kill qemu

$ ./dumplog fs.img
...

Please interpret two outputs from dumplog.